Sensoray 2224 Linux Uživatelský manuál stáhnout pdf (Strana 8)

User Controls:

• Brightness, Contrast, Saturation, Hue

• Audio Mux MPEG in: Same as audio input. Line-In, Test Tone, SDI

• Audio Mux Line Out: Selects the output source for the audio line-out output

connection. Line-In, Mpeg OUT(for decode) or SDI-In.

• Audio Mux SDI Out: Selects the output source for the audio output over SDI. Line-

In, Mpeg OUT(for decode), Test Tone, or SDI-In.

Codec Controls:

• Stream Type: Displays as MPEG-2 Transport Stream. Stream type is the container.

The codec is H.264 inside the MPEG transport stream. Transport stream is defined

in the MPEG-2 standard, which may cause confusion.

• Audio Sampling Frequency: 48Khz

• Audio Encoding: MP2

• Audio Layer II Bitrate: 128kbps, 160kbps, 192kbps, 224kbps, 256kps

• Video Encoding: H.264 (AVC). The video codec in use.

• Video GOP Closure: Whether GOPs are open or not

• Video Bitrate: 1000-20000Mbps. It is recommended to use 2Mbps as a minimum

for HD sources.

Audio Input Controls:

• Audio In AGC On Left: Turns on AGC for left audio input channel

• Audio In AGC On Right: Turns on AGC for right audio input channel

• Audio In AGC Gain Left: Sets AGC gain for left audio channel. The range for the gain

is from 0 – 118 in steps of 0.5dB. A setting of 0 would be no gain. A setting of 118

would be 118x0.5db = 59.0dB. This setting does not apply if AGC is turned off.

• Audio In AGC Gain Right: Sets AGC gain for right audio channel. The range for the

gain is from 0 – 118 in steps of 0.5dB. A setting of 0 would be no gain. A setting of

118 would be 118x0.5db = 59.0dB. This setting does not apply if AGC is turned off.

• Audio In Gain Left: Sets non-AGC gain for left audio channel. The range for the gain

is from 0 – 118 in steps of 0.5dB. A setting of 0 would be no gain. A setting of 118

would be 118x0.5db = 59.0dB. This setting does not apply if AGC is turned on.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

Sensoray 2224 Linux Uživatelský manuál Strana 8