Sensoray 512 QNX Uživatelský manuál stáhnout pdf (Strana 5)

3. Introduction

The Sensoray Model 512 is an MPEG video encoder decoder board. Some of the features include:

General

• Real time MPEG-2 and MPEG-1 video encoder and decoder

• Support for variable bit rate and constant bit rate

• IPB pictures to 15Mbps for constant bit rate and 10Mbps for variable bit rate

• Supports multiple resolutions (704x480, 640x480, 352x240, etc.)

• Support for NTSC, PAL

• Composite and S-Video inputs and outputs

• During encoding and standby, video input is fed to output for easy adjustment

• Onboard linear 16-bit audio CODEC (uncompressed audio)

• PC/104 form factor

• Either BNC connectors or header for video input and output

• Either mini phone jacks or header for audio input and output

• 3 digital TTL level digital inputs and/or outputs

• Low power

Video encoder

• Generates 13818 (MPEG-2) and 11172 (MPEG-1) compliant elementary streams (ES)

• Operates up to 30 frames per second

• Selectable bit rate

Video decoder

• Decodes both MPEG-1 and MPEG-2 streams

• Horizontal and vertical scaling

4. Hardware Configuration

The 512 is installed on a PC/104 stack. Four mounting holes are provided, one in each corner, for

mechanical stability. The bus connectors are the large ones as seen on the bottom of figure 1.

The base address of the 512 must be selected using the base address selection jumper, as seen in the

lower left hand corner of figure 1. Address selection will be discussed in a following section.

Video and digital I/O are present on three connectors. The header, J1, has all I/O signals, including S-

Video, composite video and digital. J27, J28 are for composite video only.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Žádné komentáře

Sensoray 512 QNX Uživatelský manuál Strana 5