SENSORAY | p. 503.684.8005 | email:[email protected] | www.SENSORAY.com7313 SW Tech Center Drive | Portland, OR 97203HD IP Camera with H.264 Compressi
RTSP streamsLive View / RTSP Streams page provides a list of rtsp:// URLs which can be viewed using VLC or another RTSP-compatible player. The player
RTSP streams use TCP port 8554 and UDP ports 6970-6999.11
Stream ControlStream control window allows individual network configuration and control of each of the two streams.The “Current” section displays the
Startup: if set to On, the stream will start automatically when the 3011 is powered up.13
Stream ConfigurationStream configuration window allows configuring individual stream parameters which may differ between streams A and B.Format: allow
Aspect ratio setting may help achieve better viewing experience with some combinationsof video sources and stream players. Transform field allows sele
Stream Configuration - VideoStream Config – Video window allows configuration of video parameters common to both streams A and B. Brightness, saturati
Stream Configuration - SnapshotThis page allows taking JPEG snapshots at up to full 13 Mp resolution.17
Clock ConfigurationThe Clock Configuration page allows setting the 3011 internal clock either manually (using a 24-hour format), or to the host's
Network ManagementEach 3011 is shipped with a default IP address 192.168.30.11 and a netmask 255.255.0.0. Those settings can be modified using a Web p
Table of ContentsLIMITED WARRANTY...3INTRODUCTION.
Depending on the network restrictions one or two steps may be necessary to set a new IP address. If the network used to configure the unit can not acc
Once the 3011 receives a network packet addressed to it, the temporary IP address will be in effect. To send a packet either ping the board or connect
User managementUser Management window allows access to the device to be limited to certain users with an associated permission level. The permissions
• Admin (full access).To create a new user account, click the Create new user link.To delete a user account, check the checkbox below the red X in the
To create a new user, enter the user name and password, select the desired permission level and then click Create User.Both user name and password are
Firmware updateThe Firmware Update window displays the versions of the device's firmware components and the serial number. To update the firmwar
Firmware resetDuring the firmware update the new firmware image is stored into a new location of the internal flash memory storage, while the original
Traversing routersThe following ports need to be accessible:• for browser preview: TCP port 1935;• for RTSP streams: TCP port 8554, UDP ports 6970-699
SpecificationsImage sensor Progressive scan, CMOS, 4192 x 3104 (Sony FCB-MA130) Focus range 100 mm to infinity Compression H.264 High Profile at Leve
Revision historyVersion Notes1.0.1, February 2015 “Firmware reset” and “Traversing routers” sections added.1.0.0, December 2014 Initial release.29
Limited warrantySensoray Company, Incorporated (Sensoray) warrants the hardware to be free from defects in material and workmanship and perform to app
IntroductionModel 3011 is a miniature HD IP camera that fits in a 2.25 x 2.00 x 1.20 inch enclosure (including the lens). The camera is capable of pro
ConnectorsFig.1. Model 3011 connectors.Left to right:• Ethernet connector;• GPIO and power terminal block.Below:• status LED;• configuration button.Mo
Fig.2. Optoisolated GPIO.GPIO requires power (pins GPIO-VCC and GND) in the range of 3 to 5 VDC. The input pin (GPI-A) is connected to an anode of an
Web page interfaceMain menuMain Menu is the default screen displayed when the browser connects to the 3011. The default IP address as shipped is 192.1
Live stream viewLive stream view windows display the live view of one of the two streams available from the 3011. To access the window click on one of
Live View is not supported when the stream is configured as MPEG4.The web player is using Flash RTMP protocol on TCP port 1935.9
Komentáře k této Příručce