Sensoray 2444 Uživatelský manuál

3G-SDI 4x4 Matrix Switch Model 2444Hardware Manual Ver.1.0.2 | May 2014

Switch configuration pageFig.4. Switch configuration page.The page allows configuring input equalizers for each of the four inputs of the switch.Exten

Network configuration pageFig.5. Network configuration page.The page provides means to configure network parameters.Notes:1. The new parameters do not

Information pageFig.6. Information page.The page contains the unit's status information.12

Telnet serverThe Telnet server provides an alternative way of controlling the 2244. It may be particularly useful with automated client applications.T

sswSyntax:ssw <out> <in>Connect matrix switch output out (1-4) to input in (1-4).gswSyntax:gsw <out>Get the input connected to outpu

glaSyntax:gla <in>Get launch amplitude value for selected input in. Returns 0 (default), 1 (+50%) or 2 (+100%).sbriSyntax:sbri <val>Sets t

Serial communication interfaceModel 2444 supports serial communication interface configurable as RS-422 or RS-485. The interface is connected to exter

Table 2. Configuration switches.Switch Function1 Off Output driver 120 Ohm termination offOn Output driver 120 Ohm termination on2 Off Input driver 12

SpecificationsVideoMatrix 4x4 (4 inputs, 4 outputs)Supported data rates 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, 2.97 GbpsStandards SMPTE 259M(C)

Revision historyVersion Notes1.0.2, May 2014 Correction in the IP address setup procedure with a Linux computer.1.0.1, May 2011 Equalized cable length

Table of ContentsLIMITED WARRANTY...3INTRO

Limited warrantySensoray Company, Incorporated (Sensoray) warrants the hardware to be free from defects in material and workmanship and perform to app

IntroductionModel 2444 is a 4x4 matrix (crosspoint) switch designed to operate with SDI signals from 125 Mbps to 2.97 Gbps. It supports SMPTE 259M(C)

Front panel interfaceModel 2444 has 4 SDI inputs (numbered 1 through 4) and 4 SDI outputs (numbered 1 through 4). All of those are brought out using B

It is possible to switch more than one output with one press of the Set button. For that use multiple Select buttons within 5 seconds from the last pr

Network InterfaceNetwork setupEach model 2444 unit is assigned a static IP address. As shipped from the factory the IP address is set to 192.168.24.44

Proceed to step 2 without cycling the power (while the unit is still in configuration mode).Step 2 – Set up a permanent IP addressConnect to the unit

HTTP ServerThe HTTP server (Web page interface) makes it possible to control and configure model 2444 using a computer connected to the network and a