Sensoray 2226 Uživatelský manuál

HD/SD H.264 Capture Device (H.264 Video Encoder + Decoder) User’s Manual Model 2226 | Rev.A | March 2010

10 Connector Pin/Signal Definitions Internal Board Test Connector: J1 It is used for internal/manufacturing test only. Therefore, it is not describ

11 Pin Signal Pin Signal 1 Ground 2 S-Video Input-0 -- Y 3 Ground 4 S-Video Input-0 -- C 5 Ground 6 Composite Video Input-0 7

12 Stereo Audio Input Connector, 3.5mm TRS AudioJack: J13 It is main Audio Input to the board. Pin Signal Pin Signal Pin Signal Tip Stereo L

13 LEDs Power-OK Indicators: D13 ~ D18 The LED D13 to D18 are used for indicating on-board Power-OK status. LED Signal D13 +5V Power-OK Status D

14 ARM9 General Purpose or Status Indicators: D7 and D29 The LED D7 and D29 are connected to the on-board ARM9 microcontroller’s pin PB14 and PB8,

15 Specifications Host Interface USB 2.0 (High Speed) Video Systems NTSC or PAL Video Inputs Composite Videos: SD 1 Chan

Table of Contents TABLE OF CONTENTS ...2 LIMITED WARRAN

3 SD Composite Video Output-0, BNC: J16...12 SD Composite Video Output-1, BNC: J17...

4 Limited warranty Sensoray Company, Incorporated (Sensoray) warrants the hardware to be free from defects in material and workmanship and perform to

5 Special handling instructions The circuit board contains CMOS circuitry that is sensitive to Electrostatic Discharge (ESD). Special care should b

6 Introduction The Sensoray Model 2226 is a USB 2.0 HD/SD H.264 capture device, and configurable as Encoding or Decoding device. It supports many dif

7 Feature Summary  Host Interface: USB 2.0 (High Speed)  Video Systems: NTSC and PAL  Video Inputs & Outputs: SDI, Composite Video and

8 Reference Board Picture and Connector Layout

9 Connector List J1 TEST[3:0]: (Internal Manufacturing Test Use Only) J2 SDI Output-1: NBC Connector, 75 Ohms J3 SDI Input: NBC Co